Toyota Camry ACV40 2008 Smart Remote generated and programmed by Xhorse VVDI Key Tool Max with VVDI Mini OBD Tool like a charm.
Generate Camry 2008 key to Camry 2015+
Toyota Camry ACV40 smart remote chip: 71 433MHZ
Step 1.Check the original smart remote
Put the key into the coil of VVDI Key Tool Max
Tap Transponder clone>> Read transponder
Chip: 4D DST40
Password: 94 433 92MHZ ASK
Step 2.Generate smart remote with XM- TOYOOGL PCB
Tap VEHICLE REMOTE>> TOYOTA>> 0140 433 92 ASK
Put the Xhorse TOY-T universal Smart key into coil and press ‘Generate’
Detecting the remote
Calculating… require 5 seconds, query after 10 seconds (cannot be cancelled)
Burn success after 2 minutes
Now this PCB is generated to TOYOTA Camry
Step 3.Add smart remote
Back to the main menu
Change to Mini OBD Tool screen
Connect Key Tool Max with Mini OBD via Bluetooth
Tap IMMO Programming>> TOYOTA>> Select by type>> Smart key system>> Type 3 (8A/4D+ CAN)
Press ‘Start execution’
Select ‘Add a key’
Turn on the ignition switch
The number of registered key is 2, and the number of keys that can also be registered is 5.
Keep touching the ignition switch sigh surface of a registered key, complete the operations within 30 seconds after clicking ‘OK’
After touching, you will hear 1 beep.
Click ‘OK’ and keep touching the ignition switch with sign surface of the key to be registered within 30s.
Note: If the key sounds once, take the key farther away. If the key sounds twice, it is programmed successfully.
Key registration succeeded
Now the number of registered key is 3, and the number of keys that can also be registered is 4.
Test the new smart remote OK, then install the PCB back into new style TOYOTA 2015+ shell
Start the car normally.
More information about Xhorse, please refer to https://www.autonumen.com
Leave a Reply