How to use CK-200 auto key programmer to make new car keys

It is use friendly according to ck100 key programmer V38.07 user manual, this user manual of CK-200 will guide you how to use ck-200 key programmer.

the operation guide of CK-200 Key Programmer,

Firstly, Prepared two keys, one key can start the engine, another one cannot (blank key) and
connected cable to the device.

Secondly, Connected CK200 auto key programmer v45.6 device into the OBD socket.

Next, Turned on CK-200 pin code device.Following was selecting car model according to CK-200 key programmer instructions.

Then, Inserted a key and turned the console.Turned ignition on then removed the key.After that, allowed to add a blank new key while left ignition off.Waiting for 45 seconds (max 60 seconds) until the safety access procedure was completed.