Two options to recharge Launch X-431 Diagun Auto Scanner: one is to use the charger (see the No.6 of Diagram 2-2 in chapter 2.3 for details); the other is to use an external power supply (DLC) via wire connection.Recharge through the charger Recharge it under conditions of power off, power on and stand-by mode. The power indicator (green light) stays on when recharging and off when the battery is fully recharged.
The appliance could be turned on either being connected to the charger or an external power supply. ” ” icon would then appear in the taskbar, Power Properties interface shows ‘charging’, as shown below: When using the appliance without connecting to an external power supply, if the battery power is more than 40%, you could not find the icon of battery in the taskbar, the Power Properties interface then indicates battery is in normal states, and shows actual battery power.When using the appliance without connecting an external power supply, the icon ” ” appears in the taskbar if the battery power is lower than 40% and above 10%. The Power Properties interface indicates the battery is running low and shows the actual battery power.When using the appliance without connecting to an external power supply, if the battery power is less than 10% , a dialogue box for warning will be popped up and the icon ” ” appears in the taskbar. The Power Properties interface indicates the battery power is too low and shows the current battery power.
This X431 Diagun is the new version. It has 9 launguages and can test 40 models of vehicles，including the western vehicles, European models and Eastern brands, The Carlist include:( Landrover,suzuki,Euro, Audi, BMW, Toyato, Ford, Chevy, Jaguar, Honda, HYundai, Isuzu, HIA, Lancia, Benz can, Mazada, Mitsubishi, Nissan, Peugeot, Porsche, Renault, Alfa romeo, Rover, Saab, Sert, Skoda, Ssangyong, Subaru, Iran citroen, Deawoo, Indoneia daihatsu, Volvo, VW, OBDII, OEMO, Fiat, smart, Sprinter, Vauxhall)
Leave a Reply